Sunday, 27 September 2015
IMPORTANT INTERVIEW QUESTION
1.)Explain the reason that why big tyres are used in rear of vehicles.
- Large tyres provide larger surface area touching the ground, thus providing the more pulling power. Basically tractors have larger rear tyres because tractors don’t have to operate at higher speeds, thus getting the same ground speed with larger tyres. Moreover gear ratios don’t have to be as high as b/c of the tyres.
2.)What is kingpin offset? State some of its application.
3.)Explain the basic difference between BS2 and BS3 engine.
- The kingpin offset is the part, basically called as pivot used in the steering of the vehicles. This offset helps in rotating of the steering and thus it’s very useful in steering mechanism of the cars.
- Applications: This is also used to measure scrub radius with the help of geometric parameters of wheel plane above and below ground level.
- It provides directional stability to the vehicles when it i combined with the caster.
3.)Explain the basic difference between BS2 and BS3 engine.
- The basic difference of BS2 and BS3 engines is the presence of catalytic convertor. Catalytic convertor is present in BS3 engine which helps in reducing the formation of HC and CO. While in BS2 engine, no catalytic convertor is present which forms HC and CO. Thus in BS3 engine there is no emission of harmful CO and HC. The full form of BS is bharat stage, which is a standard of emission in India.
Thursday, 17 September 2015
Saturday, 1 August 2015
Positive Displacement Pump (Lobe Pump)
One practical difference between dynamic and positivedisplacement pumps is their ability to operate under closed valve conditions.
Positive displacement pumps physically displace the fluid; hence closing a valve downstream of a positive displacement pump will result in a continual build up in pressure resulting in mechanical failure of either pipeline or pump. Dynamic pumps differ in that they can be safely operated under closed valve conditions (for short periods of time).
It is called so because replacing equal quantity of liquid from cavity is called positive displacement.
HOW BRAKES STOP VEHICLES
HOW BRAKES STOP VEHICLES
Brakes are an energy-absorbing mechanism that converts vehicle movement into heat while stopping the rotation of the wheels.
All braking systems are designed to reduce the speed and stop a moving vehicle and to keep it from moving if the vehicle is stationary.
Service brakes are the main driver-operated brakes of the vehicle, and are also called base brakes or foundation brakes.
Most vehicles built since the late 1920s use a brake on each wheel. To stop a wheel, the driver exerts a force on a brake pedal. Force on the brake pedal pressurizes brake fluid in a master cylinder.
This hydraulic force (liquid under pressure) is transferred through steel lines and flexible brake lines to a wheel cylinder or caliper at each wheel. Hydraulic pressure to each wheel cylinder or caliper is used to force friction materials against the brake drum or rotor.
The heavier the vehicle and the higher the speed, the more heat the brakes have to be able to absorb.
Long, steep hills can cause the brakes to overheat, reducing the friction necessary to slow and stop a vehicle
GLARE (Glass Laminate Aluminium Reinforced Epoxy)
GLARE (Glass Laminate Aluminium Reinforced Epoxy)
GLARE is a "Glass Laminate Aluminium Reinforced Epoxy" FML, composed of several very thin layers of metal (usually aluminium) interspersed with layers of glass-fibre "pre-preg", bonded together with a matrix such as epoxy. The uni-directional pre-preg layers may be aligned in different directions to suit the predicted stress conditions.
Although GLARE is a composite material,[1] its material properties and fabrication are very similar to bulk aluminum metal sheets. It has far less in common with composite structures when it comes to design, manufacture, inspection or maintenance. GLARE parts are constructed and repaired using mostly conventional metal material techniques.
Its major advantages over conventional aluminium are:
Better "damage tolerance" behaviour (especially impact and metal fatigue, as the elastic strain is larger than other metal material it can consume more impact energy. It is dented easier but has a higher penetration resistance )
Better corrosion resistance
Better fire resistance
Lower specific weight
Furthermore, it is possible to "tailor" the material during design and manufacture such that the number, type and alignment of layers can suit the local stresses and shapes throughout the aircraft. This allows the production of double-curved sections, complex integrated panels or very large sheets, for example.
While a simple manufactured sheet of GLARE will be more expensive than an equivalent sheet of aluminium, considerable production savings can be made using the aforementioned optimization. A structure properly designed for GLARE will be significantly lighter and less complex than an equivalent metal structure, and will require less inspection and maintenance and enjoy a much longer lifetime-till failure, making it a cheaper, lighter and safer option overall.
Besides the applications on the Airbus A380 fuselage, GLARE has multiple 'secondary' applications. GLARE is also the material used in the ECOS3 blast-resistant Unit Load Device. This is freight container shown to completely contain the explosion and fire resulting from a bomb such as that used over Lockerbie. Other applications include among others the application in the Learjet 45 and in the past also in cargo floors of the Boeing 737.
Current production
GLARE is currently produced by Cytec Engineered Materials in Wrexham, UK who supplies it to the Airbus A380 component manufacturing facilities at Stork Fokker in the Netherlands as well as at Airbus in Nordenham, Germany. Stork Fokker has opened a brand new facility next to its existing facilities in Papendrecht, the Netherlands. There Stork Fokker is able to produce Glare sheets of 4.5 x 11.5 m including the milling of doors windows etc. on a state-of-the-art 5-axis milling machine with a movable bed
Subscribe to:
Posts (Atom)







